Phottix Strato TTL for Canon Manuel d'utilisateur télécharger pdf (Page 13)

INSTRUCTION MANUAL

7. Metering Mode: Setting Average or

Evaluative metering mode for the flash

through camera menu is supported.

8. Changing Channels: After enabling

wireless ash functions on the camera, ash

transmission channels can be changed in the

camera menu. Changes made to channels in

the camera menu will change the working

channel of the Strato TTL Transmitter on the

camera.

Please note:

- If the “wireless ash functions” in the camera

set-up menus has been enabled Second

Curtain Sync Functions will not work. The

“Wireless flash functions” selection needs

to be disabled to use Second Curtain Sync

functions.

Connecting the Strato TTL receiver

to flashes or studio lights by sync

cable

1. Turn off the flash/studio light and the

Strato TTL receiver.

2. Connect a cable to the receiver’s 3.5 mm

Sync Port.

3. Connect the opposite end of the cable to

a ash or studio strobe (A 6.3 mm adapter is

included for studio strobes with larger ports).

4. Turn on the flash/strobe and the Phottix

Strato TTL receiver. Set the flash/strobe to

Manual mode (if applicable).

5. Press the Shutter Button of the camera

connected to the transmitter -- flashes

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 166 167

Pas de commentaire

Phottix Strato TTL for Canon Manuel d'utilisateur Page 13